LN Series Guides
Home Page > Pneumatic > Pneumatic Cylinders > LN Series Guides > 

LN Series Guides

LN Series Guides

Specifications
» Mounting dimensions meet MAG standards. 
» Piston diameter: 32 mm - 100 mm 
» Assembly dimensions comply with IS series cylinders


Technical Specifications 
Operating Temperature: -20 °C to +80 °C.
Piston Speed: Maximum 1 m/s.

Application Conditions: 
» Movement axes and connection points of pneumatic cylinder piston rod and linear bearing should be mechanically aligned. Any lateral loads to piston rod and piston bearings should be avoided. 
» Buckling length and buckling load of piston rod and/or pneumatic cylinder should be considered. 
» Maximum operating pressure should be complied in each operation of pneumatic cylinder. 
» Adverse effects such as aggressive fine particles, vapours, high temperature and compressed air contamination should be avoided.  

Materials:
Bearing body is manufactured from anodic coated aluminium material.
Bearing shafts are manufactured from Ck45 material with a surface plated with minimum 20 µm hard chrome at f7 tolerance.   
Bearing bushes are manufactured from teflon.

Warranty and Service:
MAG LN series linear bearings are under the warranty of our company for 2 years. Also, service and spare part support is provided for 10 years. User induced errors and errors resulting from inappropriate operating conditions are outside the scope of warranty. 
Service and repair activities are performed by MAG personnel. In the cases of any damage which may occur during assembly of the product to system and any intervention on product made by persons other than MAG personnel for the purpose of repair and maintenance, the warranty of product is cancelled.  

You can contact with us for your requests for any kinds of special design cylinders. 

LN Series Guides
Home Page > Pneumatic > Pneumatic Cylinders > LN Series Guides > 

LN Series Guides

LN Series Guides

Specifications
» Mounting dimensions meet MAG standards. 
» Piston diameter: 32 mm - 100 mm 
» Assembly dimensions comply with IS series cylinders


Technical Specifications 
Operating Temperature: -20 °C to +80 °C.
Piston Speed: Maximum 1 m/s.

Application Conditions: 
» Movement axes and connection points of pneumatic cylinder piston rod and linear bearing should be mechanically aligned. Any lateral loads to piston rod and piston bearings should be avoided. 
» Buckling length and buckling load of piston rod and/or pneumatic cylinder should be considered. 
» Maximum operating pressure should be complied in each operation of pneumatic cylinder. 
» Adverse effects such as aggressive fine particles, vapours, high temperature and compressed air contamination should be avoided.  

Materials:
Bearing body is manufactured from anodic coated aluminium material.
Bearing shafts are manufactured from Ck45 material with a surface plated with minimum 20 µm hard chrome at f7 tolerance.   
Bearing bushes are manufactured from teflon.

Warranty and Service:
MAG LN series linear bearings are under the warranty of our company for 2 years. Also, service and spare part support is provided for 10 years. User induced errors and errors resulting from inappropriate operating conditions are outside the scope of warranty. 
Service and repair activities are performed by MAG personnel. In the cases of any damage which may occur during assembly of the product to system and any intervention on product made by persons other than MAG personnel for the purpose of repair and maintenance, the warranty of product is cancelled.  

You can contact with us for your requests for any kinds of special design cylinders. 

LN Series Guides
Home Page > Pneumatic > Pneumatic Cylinders > LN Series Guides > 

LN Series Guides

LN Series Guides

Specifications
» Mounting dimensions meet MAG standards. 
» Piston diameter: 32 mm - 100 mm 
» Assembly dimensions comply with IS series cylinders


Technical Specifications 
Operating Temperature: -20 °C to +80 °C.
Piston Speed: Maximum 1 m/s.

Application Conditions: 
» Movement axes and connection points of pneumatic cylinder piston rod and linear bearing should be mechanically aligned. Any lateral loads to piston rod and piston bearings should be avoided. 
» Buckling length and buckling load of piston rod and/or pneumatic cylinder should be considered. 
» Maximum operating pressure should be complied in each operation of pneumatic cylinder. 
» Adverse effects such as aggressive fine particles, vapours, high temperature and compressed air contamination should be avoided.  

Materials:
Bearing body is manufactured from anodic coated aluminium material.
Bearing shafts are manufactured from Ck45 material with a surface plated with minimum 20 µm hard chrome at f7 tolerance.   
Bearing bushes are manufactured from teflon.

Warranty and Service:
MAG LN series linear bearings are under the warranty of our company for 2 years. Also, service and spare part support is provided for 10 years. User induced errors and errors resulting from inappropriate operating conditions are outside the scope of warranty. 
Service and repair activities are performed by MAG personnel. In the cases of any damage which may occur during assembly of the product to system and any intervention on product made by persons other than MAG personnel for the purpose of repair and maintenance, the warranty of product is cancelled.  

You can contact with us for your requests for any kinds of special design cylinders. 

LN Series Guides
Home Page > Pneumatic > Pneumatic Cylinders > LN Series Guides > 

LN Series Guides

LN Series Guides

Specifications
» Mounting dimensions meet MAG standards. 
» Piston diameter: 32 mm - 100 mm 
» Assembly dimensions comply with IS series cylinders


Technical Specifications 
Operating Temperature: -20 °C to +80 °C.
Piston Speed: Maximum 1 m/s.

Application Conditions: 
» Movement axes and connection points of pneumatic cylinder piston rod and linear bearing should be mechanically aligned. Any lateral loads to piston rod and piston bearings should be avoided. 
» Buckling length and buckling load of piston rod and/or pneumatic cylinder should be considered. 
» Maximum operating pressure should be complied in each operation of pneumatic cylinder. 
» Adverse effects such as aggressive fine particles, vapours, high temperature and compressed air contamination should be avoided.  

Materials:
Bearing body is manufactured from anodic coated aluminium material.
Bearing shafts are manufactured from Ck45 material with a surface plated with minimum 20 µm hard chrome at f7 tolerance.   
Bearing bushes are manufactured from teflon.

Warranty and Service:
MAG LN series linear bearings are under the warranty of our company for 2 years. Also, service and spare part support is provided for 10 years. User induced errors and errors resulting from inappropriate operating conditions are outside the scope of warranty. 
Service and repair activities are performed by MAG personnel. In the cases of any damage which may occur during assembly of the product to system and any intervention on product made by persons other than MAG personnel for the purpose of repair and maintenance, the warranty of product is cancelled.  

You can contact with us for your requests for any kinds of special design cylinders.